HIGH GLOSSY PVC MARBLE SHEET FOR INTERIOR DECORATION

Name: HIGH GLOSSY PVC MARBLE SHEET FOR INTERIOR DECORATION
Brand: PLUSWIN
SKU: 551654928
Rating: 5.0 (24 reviews)

The advantages of UV PVC foam board
3D Simulated wood texture, lightweight, waterproof, mildew-proof, moth-proof
It is the best alternative material for traditional solid wood panel, plywood, particle board

Size:	12202440MM 12202800MM 1220*2900MM
Availability:

Quantity:



Inquire Add to Basket

Model:
KC-M003
Brand:
PLUSWIN

Product Description

UV Marble Sheet is a 'Ultraviolet' looking sheet which gives a sophisticated and simple look to interior.

It is suitable for most building applications for fitting in floors.PVC marble sheet is also called PVC sheet, PVC marble, PVC marble sheet. It is mainly made of stone powder (calcium carbonate powder) and plastic (PVC resin).


Pvc marble panel for interior decoration
Material	PVC +calcium powder+ additive	Origin	China
Size	1220*2440 mm and customized	Thickness	2-6.0 mm
Technology	Hot stamping foil & UV-coating	Certificate	SGS
Installation	1.Glued on the wall 2.Aluminum trim profile 3. Sealant installation	Glue	Neutral Silicone Sealant Adhesive
Color	Marble, wood, solid color & 3D. More than 100 designs in total.
Composition	35% pvc, 62% CaCo3, 3% additive.
Structure	PVC board + Hot stamp foil + UV-coating + PE protection film.

Main Characteristics

UV board

Package

marble sheet package

How to Install UV Marble Board

1.The bottom layer of the confimation and clean the bottom to be fully dry,so that the bottom level.Remove dirt and rubbish.The bottom layer,please use the gypsum board or the magnesium plate and the surface smooth and waterproof material plate.

2.Marking and Positioning
In accordance with the size of the decoration,the shape of the bottom line,positioning.

3.Double side tape adhesive bonding tape at the tixed position,hard pressed to make its cement.
Usage:the wall is about 3.3/m2 of the ceiling is about 4.3/m2.

4.Adhesive glue
Cut the hose glue bottle mouth,leaving the cigarette weight(about 7mm) the width of the exit,and then squeeze the glue,(tape beside the position in the adhesive glue into a wire bound usage on the wall about 0.5 A/m2 the ceiling about 0.6A/m2.

5.Double sided adhesive tape for the removal of the adhesive tape Stripping,remove the Separation of paper.

6.In 10 minutes after the bonding of the decorative plate,the decoration plate is bonded to the fixed position.The position of the hands to press the tape,to make it fully bonded.Please note that you can not move or re-bond.

7.Maintenace of 1 days during the course of the adhesive glue.