PVC Embossed Board is mainly made of polyvinyl chloride resin mixed with processing aids such as plasticizers and stabilizers and then processed by extrusion, of which extrusion processing is the mainstay. PVC Embossed Board is widely used in the chemical industry, construction, environmental protection, water purification because of its excellent corrosion resistance, insulation, temperature resistance, impact resistance, high strength, convenient secondary processing, and can be sawed, drilled, and planed. Treatment of acid-resistant and corrosion-resistant structural materials in industries. PVC Embossed Board blending and compounding to achieve high-quality utilization of resources and reduce costs, the PVC manufacturing industry now generally uses blending and compounding to improve product performance. So what is the blending compound of PVC Embossed Board? Next, let us take a look.

Here is that the content list:

Related content introduction of Blending compound of PVC Embossed Board

Based on PVC and long fiber mesh fabric manufacturing composite

Modified composite board

Related content introduction of Blending compound of PVC Embossed Board

This kind of PVC Embossed Board blending compound is mainly used for organic filling of PVC, such as filling organic fiber. The sisal fiber is modified first, and then plasticized and molded with PVC resin, light stabilizer, and other additives to prepare a PVC-based wood-plastic composite sheet, and then use 3 homemade light stabilizers and currently commonly used light stabilizers. The ultraviolet absorber is used to carry out the ultraviolet accelerated aging test on the board. The results show that the comprehensive UV aging resistance of PVC Embossing Board composites with polymer light stabilizers is better than that of commonly used UV absorbers; the addition of three polymer light stabilizers can make the surface fiber exposure of PVC Embossed Board composites and Microcracks are significantly less than the composite material without light stabilizer.

Based on PVC and long fiber mesh fabric manufacturing composite

Sheet method: disperse PVC in powder form in the network cloth; make the dispersion have an alternating electric field with sufficient strength and sufficient time to distribute the powder in the network cloth; heat the dispersion under pressure until the powder is formed Continuous substrate. In recent years, the production and application of thermoplastic composite materials based on natural particles as fillers have increased significantly. PVC, bamboo particles, and additives are initially dry mixed, hot and cold mixed, then reverse-rotated and extruded to granulate, and then compressed into a solidified compression molded board. It shows that the processing of bamboo particles will not cause the degradation of PVC Embossed Board composite material.

Modified composite board

Various raw materials are crushed and mixed into new wood materials, and then subjected to plastic processing techniques such as extrusion, molding, and injection molding to obtain PVC Embossed Board. The PVC Embossed Board material is non-toxic, the non-irritating odor has good processing performance, has good impact resistance, is rainproof, sun-proof, and is anti-static. It is especially suitable for outdoor open-air and some special decoration occasions. It has a long service life and can reach 15 to 20 years. A self-made stirring ball mill was used as a mechanically activated solid-phase reactor, PVC was used as a base material, and graphite was used as a thermal conductivity additive. A PVC/graphite thermally conductive composite board was prepared by blending graphite and PVC in the ball mill reactor. Studies have shown that the thermal conductivity of the modified PVC Embossing Board is significantly improved, and it has a higher softening temperature and thermal decomposition temperature. The mechanical activation reaction method can not only protect the environment but also has economic benefits.

Ordinary PVC boards generate powdery carbon residue with no strength under the flame, and a PVC fireproof board is prepared by adding fillers, which can maintain excellent performance at room temperature and can also quickly form a self-supporting porous ceramic structure under the flame, which plays a role in fire prevention.

Blending and compounding mainly reduce product costs through the inorganic filling of PVC, such as filling calcium carbonate, talcum powder, fly ash, and so on. This type of PVC Embossed Board inorganic compound has a hard texture, a wide range of sources, and low price. It is used as a filler in plastic processing and is equivalent to a modifier, which can affect the mechanical properties of PVC Embossing Board materials.

HANGZHOU JIAYING TRADE CO.LTD, specializing in the production of PVC board with its excellent quality, has continuously sold for more than ten years worldwide, such as United Stat